GP
MADE IN ITALY
The hose reels rewind automatically the hose by a spring located in the drum.
The hose can be stopped at the desired length. The hot galvanized steel structure is moulded and coated with electrostatic polyester powder resistant to UV rays.
The inner components of the hose reel and those which go in contact with the fluid are produced by a special plastic composite material.
The incorporated revolving support allows the orientation of the hose reels in order to guide its direction.
The hose reels are supplied and completed with a distribution hose which is made of polyurethane / thermoplastic material and reinforced by a special textile braid. This distribution hose is available with two different diameters. Furthermore these models are supplied with an additional connecting flexible hose 1 meter long.
|
Polyurethane hose
Hose for compressed air (nytrogen upon request)
Max pressure: 20 BAR
Weight: 6 Kg.
|
 |
|||||
|
ITEM |
INLET mm |
OUTLET Bsp |
MEASURE |
LENGTH |
AIR FLOW |
|
|
|
BX17GP15M8-12 | Ø 8 | 1/4" M | 8 x 12 | 15 m / 50 ft | 750 NL/min |
|
|
BX17GP12M10-14 | Ø 10 | 3/8" M | 10 x 14 | 12 m / 40 ft | 1080 NL/min |
